Intelligent Livestock Technology for the World's Food Supply

Tally Counter TC1 Prototype Instructions — Tests Page

Setup: It is recommended to configure the iPhone by going to Settings/display and brightness and set “auto-lock” to “never” so the phone does not enter lock/sleep mode while using the app.

1. Download “Vantex Health” app from the Apple App Store.

2. Turn hand held Tally Counter on by pressing center button on backside of device.

3. Open the Vantex Health app to display “select device” screen. Swipe from top to bottom of screen to display Tally Counter units in range labeled as “TC1_XXXXX”. Select Device.

4. Select count increment value (1,2,5 or 10). This defaults to 1.

Operation of hand held Tally Counter:

1. Power On: Press center button on backside of device.

2. Increment down: Press left button on top of device.

3. Increment up: Press right button on top of device.

4. Clear count to 0: Press and hold left button for three seconds, then release.

5. Power off: Press and hold center button for three seconds, then release.

Publish to ESRI app:

1. The publish button on the app will only be displayed when the Vantex Health app is opened by the ESRI app. This will be displayed below the counter buttons on the app.

For additional assistance please contact Mike VanDierendonck:
Cell: 408-402-2239
Email: michael.van@vantexhealth.com

Click to Download PDF Instructions

Click to Download PDF Instructions